While you are trying to set up the Linksys velop WiFi mesh extender system in your home, there is a possibility that you face the Linksys Velop router not found issue. This is a common situation that many Linksys velop users experience when they try to set up the router or access the Linksys Velop login page. We shall help you fix this issue with some easy tips. These tips can also be used to avoid any such similar issues in the future. Keep on reading further to know more about it.
What to Do When Linksys Velop Router Not Found?
Check Power Supply
The primary reason why users experience this kind of issue is that the power supply to the device is not stable. Fluctuations in the power supply would not let the device boot up completely and thus you get the error router not found.
You can easily fix the problem by making amendments to the power supply to the router. Ensure plugging it into an active and non-damaged power socket. You can use the UPS if needed.
Ensure Stable Internet Connection
Apart from the poor power supply, an unstable internet connection also won’t let the device perform well. If the internet connection is shaky, you won’t be able to access the internet properly and also the router won’t be visible in the admin dashboard to set it up. Contact your ISP and check if there are any internet outages going on. Or, perhaps you need an upgrade to the internet plan. Make the necessary changes and then see if the issue has been fixed or not.
Check Cables
Faulty cables are yet another reason why you may get Linksys velop router not found issue. So, go ahead and have a good look at all the cables connected to the router. There should be no loose cables. If any cable is damaged, then get it replaced right away. The main cables are the Ethernet cable and the power adapter. You should check them both.
Reboot Linksys Router
Is the issue still troubling you? Making amends in the power supply, internet connection and cables did not work? Well, there is a possibility that your Linksys router is troubled by some technical issues. You can try getting rid of them by rebooting the Linksys device once. So, go ahead and turn off the Linksys Velop router. Unplug it from the wall socket and let it be like that for some time. After about 5 minutes, plug the power adapter of the router into the wall socket and turn it on. As soon as the router is booted up completely, see if the issue has been fixed or not.
Reset the Router
If you still are troubled by the same issue and the problem seems adamant to leave your side then it is time you reset your Linksys velop router. It may happen sometimes that your device is stuck with some major technical issue since you have been trying to set up your router for a long time. With so many setup trials, this is a common situation. You can get this resolved by resetting the router. Thus, press the button labeled Reset on your router. But do so only while the router is powered on. This action of yours will delete all the configuration settings from the router. After the reset is done, the default factory settings will be restored on your device.
Verdict
Once you have reset your Linksys router, you can try to set it up again from scratch. Make sure you use the correct steps to execute the task at hand. You can always refer to the user manual to know what the exact steps to set up your Linksys velop mesh system are. Get the Linksys velop router as well as Linksys WiFi extender setup done and enjoy seamless internet access in all the nooks and corners of your home.